Generate Rsa Key On 2960x
16.12.2020 admin
Crypto key generate rsa Example: Switch (config)# crypto key generate rsa Enables the SSH server for local and remote authentication on the Switch and generates an RSA key pair. Generating an RSA key pair for the Switch automatically enables SSH. We recommend that a minimum modulus size of 1024 bits.
- October 2, 2015
- Posted by: Syed Shujaat
- Category: Cisco, Networking Solutions
How to find the SSH fingerprint on a Cisco switch? Hey all, brief question this time. Generally speaking, if you want to validate RSA keys, you need to find a secure way of communicating the public keys between the parties (the switch and your PC in this case) prior to using them. Generate your own key: crypto key generate rsa label. Router-Branch(config)#crypto key generate rsa The name for the keys will be: Router-Branch.grandmetric.com Choose the size of the key modulus in the range of 360 to 4096 for your General Purpose Keys. Choosing a key modulus greater than 512 may take a few minutes. How many bits in the modulus 512: 1024% Generating 1024 bit RSA keys, keys.
Use this command to generate RSA key pairs for your Cisco device (such as a router). keys are generated in pairs–one public RSA key and one private RSA key.
If your router already has RSA keys when you issue this command, you will be warned and prompted to replace the existing keys with new keys.
NOTE: Before issuing this command, ensure that your router has a hostname and IP domain name configured (with the hostname and ipdomain-name commands). /generate-public-key-certificate-online.html.
You will be unable to complete the cryptokeygeneratersacommand without a hostname and IP domain name. (This situation is not true when you generate only a named key pair.)
Here are the steps to Enable SSH and Crypto Key setup : 2 config must requried for SSH
1 Setup Local VTY line User ID and password
router (Config) # Line VTY 0 15
router (Config-line)# login local
router (Config-line)# Exit
Generate Rsa Key On 2960x Mac
!!! create local login ID/Pass
router (Config)# username [loginid] password [cisco]
router (Config)# username loginid1 password cisco1
2. router (Config)# ip domain-name example.com
router (Config)# crypto key generate rsa
how many bits in the modulus [512] :1024
router (Config)# ip ssh version2
router (Config)# CTRL Z
Note | Secure Shell (SSH) may generate an additional RSA key pair if you generate a key pair on a router having no RSA keys. The additional key pair is used only by SSH and will have a name such as {router_FQDN }.server. For example, if a router name is “router1.cisco.com,” the key name is “router1.cisco.com.server.” |
This command is not saved in the router configuration; however, the RSA keys generated by this command are saved in the private configuration in NVRAM (which is never displayed to the user or backed up to another device) the next time the configuration is written to NVRAM.
Modulus Length
Generate Rsa Key On 2960x Keyboard
When you generate RSA keys, you will be prompted to enter a modulus length. The longer the modulus, the stronger the security. However, a longer modules take longer to generate (see the table below for sample times) and takes longer to use.
The size of Key Modulus range from 360 to 2048. Are there any real steam key generators. Choosing modulus greater than 512 will take longer time.
| Router | 360 bits | 512 bits | 1024 bits | 2048 bits (maximum) |
|---|---|---|---|---|
| Cisco 2500 | 11 seconds | 20 seconds | 4 minutes, 38 seconds | More than 1 hour |
| Cisco 4700 | Less than 1 second | 1 second | 4 seconds | 50 seconds |
Cisco IOS software does not support a modulus greater than 4096 bits. A length of less than 512 bits is normally not recommended. In certain situations, the shorter modulus may not function properly with IKE, so we recommend using a minimum modulus of 2048 bits.
Syntax Description : Optional Strings to embed with SSH Crypto key
| general-keys | (Optional) Specifies that a general-purpose key pair will be generated, which is the default. | ||
| usage-keys | (Optional) Specifies that two RSA special-usage key pairs, one encryption pair and one signature pair, will be generated. | ||
| signature | (Optional) Specifies that the RSA public key generated will be a signature special usage key. | ||
| encryption | (Optional) Specifies that the RSA public key generated will be an encryption special usage key. | ||
| labelkey-label | (Optional) Specifies the name that is used for an RSA key pair when they are being exported.If a key label is not specified, the fully qualified domain name (FQDN) of the router is used. | ||
| exportable | (Optional) Specifies that the RSA key pair can be exported to another Cisco device, such as a router. | ||
| modulusmodulus-size | (Optional) Specifies the IP size of the key modulus.By default, the modulus of a certification authority (CA) key is 1024 bits. The recommended modulus for a CA key is 2048 bits. The range of a CA key modulus is from 350 to 4096 bits.
| ||
| storagedevicename: | (Optional) Specifies the key storage location. The name of the storage device is followed by a colon (:). | ||
| redundancy | (Optional) Specifies that the key should be synchronized to the standby CA. | ||
| ondevicename: | (Optional) Specifies that the RSA key pair will be created on the specified device, including a Universal Serial Bus (USB) token, local disk, or NVRAM. The name of the device is followed by a colon (:).Keys created on a USB token must be 2048 bits or less. |
| Command | Description |
|---|---|
| copy | Copies any file from a source to a destination, use the copy command in privileged EXEC mode. |
| cryptokeystorage | Sets the default storage location for RSA key pairs. |
| debugcryptoengine | Displays debug messages about crypto engines. |
| hostname | Specifies or modifies the hostname for the network server. |
| ipdomain-name | Defines a default domain name to complete unqualified hostnames (names without a dotted-decimal domain name). |
| showcryptokeymypubkeyrsa | Displays the RSA public keys of your router. |
| show crypto pki certificates | Displays information about your PKI certificate, certification authority, and any registration authority certificates. |
I have two Cisco Catalyst 2960-S 48-port switches 'stacked' using the Cisco FlexStack module. Originally I had to set them up using 'Express Setup', which I absolutly hate from my limited use of it.
I configured hostnames, ip addresses, and made sure the stack was functioning properly. I tested by plugging in a laptop and making sure it could open an internet page and all was well. I configured each switch exactly the same with the exception (obviously) of the hostname and IP. I then powered them OFF and installed the stacking module and they auto-configured themselves..
Before:
Switch-A (192.168.10.3)
Switch-B (192.168.10.4)
After:
Switch-A (192.168.10.3) Master 1
Switch-B Member 2
What I need and want to do now is setup remote access. If I have to go connect up with a console cable to configure that's fine, but I'm not sure if I need to..
If I open PuTTY and use Telnet to connect it states 'password required, but none set' and the PuTTY window closes.
If I open PuTTY and use SSH to connect it prompts me 'login as:'
If I press enter (@192.168.10.3's password:) it proceeds to prompt me for a password, which entering the password I used to setup the switch I receive 'access denied'.
I know I didn't configure SSH or Telnet for that matter when I initially set these up. I want to fix that now.
I want SSH (v2) enabled and I want to disable Telnet.
Any suggestions?